Skoda Octavia 1.6 TDI CR EU6 90 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Skoda Octavia 1.6 TDI CR EU6 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 TDI CR EU6 90 hp ECU
Skoda Octavia (2017) 1.6 TDI CR EU6 90 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 90 to 145 hp (+55 hp, +61%) and torque from 230 to 310 Nm (+80 Nm). A diesel built in 2017 — the Tricore ECU era; OBD flash works on most production revisions.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda diesel range is fully shared with VW on the MQB platform.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware. On naturally aspirated Skoda engines, the main effect is on throttle response. In the Skoda city segment, Stage 1 is more about comfort than outright power.
Frequently asked questions
How much does the power of the Skoda Octavia 1.6 TDI CR EU6 90 hp increase after Stage 1?
Stage 1 for the Skoda Octavia 1.6 TDI CR EU6 90 hp adds +55 hp — power increases from 90 to 145 hp (+61%). Torque rises from 230 to 310 Nm (+80 Nm).
What does a Stage 1 remap of the Skoda Octavia 1.6 TDI CR EU6 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +55 hp with no hardware changes.
Is Stage 1 worth doing on the base Skoda Octavia?
Yes, Stage 1 on the low-output Skoda Octavia 1.6 TDI CR EU6 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Skoda Octavia 1.6 TDI CR EU6 90 hp?
Stage 2 for the Skoda Octavia 1.6 TDI CR EU6 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.6 TDI CR EU6 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.6 TDI CR EU6 90 hp cost?
The remap price for the Skoda Octavia 1.6 TDI CR EU6 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.