Skoda Octavia 1.6 TDI CR EU6 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Octavia 1.6 TDI CR EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 TDI CR EU6 115 hp ECU
Skoda Octavia (2017) 1.6 TDI CR EU6 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 250 to 310 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. The factory calibration of Skoda diesels is conservative, leaving headroom for Stage 1.
On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
How much does the power of the Skoda Octavia 1.6 TDI CR EU6 115 hp increase after Stage 1?
The Stage 1 gain for the Skoda Octavia 1.6 TDI CR EU6 115 hp is 30 hp (+26%) over the stock 115 hp, for a total of 145 hp. Torque rises from 250 to 310 Nm (+60 Nm).
What is Stage 1 chip tuning for the Skoda Octavia?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Octavia 1.6 TDI CR EU6 115 hp?
A remap of the Skoda Octavia 1.6 TDI CR EU6 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Octavia 1.6 TDI CR EU6 115 hp?
Stage 2 on the Skoda Octavia 1.6 TDI CR EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Octavia 1.6 TDI CR EU6 115 hp built with?
The Skoda Octavia 1.6 TDI CR EU6 115 hp comes with 3 ECU variants: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Skoda Octavia be calibrated?
The Skoda Octavia 1.6 TDI CR EU6 115 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.6 TDI CR EU6 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.6 TDI CR EU6 115 hp cost?
The remap price for the Skoda Octavia 1.6 TDI CR EU6 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.