Skoda Octavia 1.5 TSI 130 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Skoda Octavia 1.5 TSI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.5 TSI 130 hp ECU
Skoda Octavia (2017) 1.5 TSI 130 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 130 to 175 hp (+45 hp, +35%) and torque from 200 to 300 Nm (+100 Nm). The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Octavia 1.5 TSI 130 hp?
After Stage 1 the power of the Skoda Octavia 1.5 TSI 130 hp rises from 130 to 175 hp, a gain of 45 hp (+35%). Torque rises from 200 to 300 Nm (+100 Nm).
How does Stage 1 differ from stock on the Skoda Octavia?
Stage 1 on the Skoda Octavia 1.5 TSI 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 TSI 130 hp?
Stage 1 on the Skoda Octavia 1.5 TSI 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.5 TSI 130 hp?
Stage 2 on the Skoda Octavia 1.5 TSI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.5 TSI 130 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.5 TSI 130 hp?
The cost of Stage 1 for the Skoda Octavia 1.5 TSI 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.