Skoda Octavia 1.4 TSI CNG 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Octavia 1.4 TSI CNG 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.4 TSI CNG 110 hp ECU
Skoda Octavia (2017) 1.4 TSI CNG 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 200 to 240 Nm (+40 Nm). ECU — Bosch MED17.5.21. Flashing method: OBD or Bench depending on the unit's protection. The Temic DQ200G2 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+.
Frequently asked questions
How much does the power of the Skoda Octavia 1.4 TSI CNG 110 hp increase after Stage 1?
After Stage 1 the power of the Skoda Octavia 1.4 TSI CNG 110 hp rises from 110 to 135 hp, a gain of 25 hp (+23%). Torque rises from 200 to 240 Nm (+40 Nm).
How does Stage 1 differ from stock on the Skoda Octavia?
Stage 1 on the Skoda Octavia 1.4 TSI CNG 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.4 TSI CNG 110 hp?
Stage 1 on the Skoda Octavia 1.4 TSI CNG 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.4 TSI CNG 110 hp?
Stage 2 on the Skoda Octavia 1.4 TSI CNG 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Skoda Octavia 1.4 TSI CNG 110 hp run?
The control unit of the Skoda Octavia 1.4 TSI CNG 110 hp is the Bosch MED17.5.21. Before flashing, the engineer identifies the exact revision and selects the write method.
Does the Temic DQ200G2 transmission need calibration after Stage 1 on the Skoda Octavia?
Remapping the Temic DQ200G2 gearbox is essential to fully unlock Stage 1 on the Skoda Octavia 1.4 TSI CNG 110 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.4 TSI CNG 110 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.4 TSI CNG 110 hp?
The cost of Stage 1 for the Skoda Octavia 1.4 TSI CNG 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.