Skoda Octavia 2.0 TSI 220 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Skoda Octavia 2.0 TSI 220 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 2.0 TSI 220 hp ECU
Skoda Octavia (2013) 2.0 TSI 220 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 220 to 300 hp (+80 hp, +36%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 7 configurations · 7 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Skoda shares ECUs and calibration algorithms with VW.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. High-output Skoda engines are the RS range, with solid headroom for Stage 1. On Skoda RS models, Stage 1 works trouble-free on stock hardware.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
How many horsepower does the Skoda Octavia 2.0 TSI 220 hp reach after a remap?
The Stage 1 gain for the Skoda Octavia 2.0 TSI 220 hp is 80 hp (+36%) over the stock 220 hp, for a total of 300 hp. Torque rises from 350 to 420 Nm (+70 Nm).
What is Stage 1 chip tuning for the Skoda Octavia?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Skoda Octavia?
The high-output Skoda Octavia 2.0 TSI 220 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Skoda Octavia 2.0 TSI 220 hp?
Stage 2 on the Skoda Octavia 2.0 TSI 220 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Octavia 2.0 TSI 220 hp built with?
The Skoda Octavia 2.0 TSI 220 hp comes with 4 ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB)) on the Skoda Octavia be calibrated?
The Skoda Octavia 2.0 TSI 220 hp has 3 TCU variants: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 2.0 TSI 220 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 2.0 TSI 220 hp cost?
The remap price for the Skoda Octavia 2.0 TSI 220 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.