Skoda Octavia 1.6 TDI EU6 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Octavia 1.6 TDI EU6 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 TDI EU6 110 hp ECU
Skoda Octavia (2013) 1.6 TDI EU6 110 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 250 to 310 Nm (+60 Nm). ECU — Delphi DCM6.2V. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. DPF/SCR with AdBlue is standard on all Euro-6 Skoda diesels.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Octavia 1.6 TDI EU6 110 hp?
Stage 1 for the Skoda Octavia 1.6 TDI EU6 110 hp adds +35 hp — power increases from 110 to 145 hp (+32%). Torque rises from 250 to 310 Nm (+60 Nm).
What does a Stage 1 remap of the Skoda Octavia 1.6 TDI EU6 110 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Octavia 1.6 TDI EU6 110 hp?
A remap of the Skoda Octavia 1.6 TDI EU6 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Octavia 1.6 TDI EU6 110 hp?
Stage 2 for the Skoda Octavia 1.6 TDI EU6 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Skoda Octavia 1.6 TDI EU6 110 hp use?
The Skoda Octavia 1.6 TDI EU6 110 hp is fitted with the Delphi DCM6.2V ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.6 TDI EU6 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.6 TDI EU6 110 hp cost?
The remap price for the Skoda Octavia 1.6 TDI EU6 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.