Skoda Octavia 1.6 MPI 110 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Skoda Octavia 1.6 MPI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 MPI 110 hp ECU
Skoda Octavia (2013) 1.6 MPI 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 118 hp (+8 hp, +7%) and torque from 155 to 165 Nm (+10 Nm). A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Mid-range Skoda turbo petrol engines are a high-volume Stage 1 subject.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the Skoda Octavia 1.6 MPI 110 hp reach after a remap?
Stage 1 chip tuning on the Skoda Octavia 1.6 MPI 110 hp boosts engine output by 8 hp: from 110 to 118 hp. Torque rises from 155 to 165 Nm (+10 Nm).
What changes in the Skoda Octavia ECU after Stage 1?
Stage 1 on the Skoda Octavia 1.6 MPI 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +8 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 MPI 110 hp?
Stage 1 on the Skoda Octavia 1.6 MPI 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.6 MPI 110 hp?
Stage 2 for the Skoda Octavia 1.6 MPI 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.6 MPI 110 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.6 MPI 110 hp?
The cost of Stage 1 for the Skoda Octavia 1.6 MPI 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.