Skoda Octavia 1.2 TSI S&S 85 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Skoda Octavia 1.2 TSI S&S 85 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.2 TSI S&S 85 hp ECU
Skoda Octavia (2013) 1.2 TSI S&S 85 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 85 to 130 hp (+45 hp, +53%) and torque from 160 to 220 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MED17.5.21, Bosch MED17.5.25. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware. On naturally aspirated Skoda engines, the main effect is on throttle response. In the Skoda city segment, Stage 1 is more about comfort than outright power.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Octavia 1.2 TSI S&S 85 hp?
Stage 1 for the Skoda Octavia 1.2 TSI S&S 85 hp adds +45 hp — power increases from 85 to 130 hp (+53%). Torque rises from 160 to 220 Nm (+60 Nm).
What does a Stage 1 remap of the Skoda Octavia 1.2 TSI S&S 85 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Is Stage 1 worth doing on the base Skoda Octavia?
Yes, Stage 1 on the low-output Skoda Octavia 1.2 TSI S&S 85 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Skoda Octavia 1.2 TSI S&S 85 hp?
Stage 2 for the Skoda Octavia 1.2 TSI S&S 85 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Skoda Octavia 1.2 TSI S&S 85 hp built with?
The Skoda Octavia 1.2 TSI S&S 85 hp comes with 2 ECU variants: Bosch MED17.5.21, Bosch MED17.5.25. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.2 TSI S&S 85 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.2 TSI S&S 85 hp cost?
The remap price for the Skoda Octavia 1.2 TSI S&S 85 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.