Skoda Octavia 1.2 TSI S&S 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Octavia 1.2 TSI S&S 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.2 TSI S&S 110 hp ECU
Skoda Octavia (2013) 1.2 TSI S&S 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 175 to 250 Nm (+75 Nm). This engine ships with different ECU variants: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Octavia 1.2 TSI S&S 110 hp?
After Stage 1 the power of the Skoda Octavia 1.2 TSI S&S 110 hp rises from 110 to 135 hp, a gain of 25 hp (+23%). Torque rises from 175 to 250 Nm (+75 Nm).
How does Stage 1 differ from stock on the Skoda Octavia?
Stage 1 chip tuning of the Skoda Octavia is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Skoda Octavia 1.2 TSI S&S 110 hp?
Yes, Stage 1 for the Skoda Octavia 1.2 TSI S&S 110 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Octavia?
Stage 2 on the Skoda Octavia 1.2 TSI S&S 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Skoda Octavia 1.2 TSI S&S 110 hp?
The Skoda Octavia 1.2 TSI S&S 110 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Skoda Octavia 1.2 TSI S&S 110 hp have?
The Skoda Octavia 1.2 TSI S&S 110 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Octavia warranty after chip tuning?
The factory warranty of the Skoda Octavia does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Octavia take?
On the Skoda Octavia 1.2 TSI S&S 110 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Octavia?
Yes, the original ECU firmware of the Skoda Octavia 1.2 TSI S&S 110 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Octavia?
Stage 1 for the Skoda Octavia 1.2 TSI S&S 110 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.