Skoda Octavia 1.0 TSI/TFSI 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Skoda Octavia 1.0 TSI/TFSI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.0 TSI/TFSI 115 hp ECU
Skoda Octavia (2013) 1.0 TSI/TFSI 115 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 200 to 240 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.1.27, Bosch MED17.5.21. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. Mid-generation petrol models use standard OBD flash via MQB.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Octavia 1.0 TSI/TFSI 115 hp?
Stage 1 for the Skoda Octavia 1.0 TSI/TFSI 115 hp adds +20 hp — power increases from 115 to 135 hp (+17%). Torque rises from 200 to 240 Nm (+40 Nm).
What does a Stage 1 remap of the Skoda Octavia 1.0 TSI/TFSI 115 hp include?
Stage 1 on the Skoda Octavia 1.0 TSI/TFSI 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 TSI/TFSI 115 hp?
Stage 1 on the Skoda Octavia 1.0 TSI/TFSI 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.0 TSI/TFSI 115 hp?
Stage 2 for the Skoda Octavia 1.0 TSI/TFSI 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Skoda Octavia 1.0 TSI/TFSI 115 hp have?
The Skoda Octavia 1.0 TSI/TFSI 115 hp has 2 ECU variants: Bosch MED17.1.27, Bosch MED17.5.21. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.0 TSI/TFSI 115 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.0 TSI/TFSI 115 hp?
The cost of Stage 1 for the Skoda Octavia 1.0 TSI/TFSI 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.