Skoda Octavia 1.6 FSI 115 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Skoda Octavia 1.6 FSI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.6 FSI 115 hp ECU
Skoda Octavia (2005) 1.6 FSI 115 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 130 hp (+15 hp, +13%) and torque from 155 to 173 Nm (+18 Nm). ECU — Bosch MED7.5.11. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Octavia 1.6 FSI 115 hp?
The Stage 1 gain for the Skoda Octavia 1.6 FSI 115 hp is 15 hp (+13%) over the stock 115 hp, for a total of 130 hp. Torque rises from 155 to 173 Nm (+18 Nm).
What is Stage 1 chip tuning for the Skoda Octavia?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Octavia with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Octavia 1.6 FSI 115 hp?
A remap of the Skoda Octavia 1.6 FSI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Octavia 1.6 FSI 115 hp?
Stage 2 on the Skoda Octavia 1.6 FSI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Skoda Octavia 1.6 FSI 115 hp use?
The Skoda Octavia 1.6 FSI 115 hp is fitted with the Bosch MED7.5.11 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Skoda Octavia remain valid after Stage 1?
After remapping the Skoda Octavia, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Octavia?
Reading and writing via OBD takes 25-30 minutes on the Skoda Octavia. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Octavia?
Before Stage 1 the original of the Skoda Octavia 1.6 FSI 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Octavia 1.6 FSI 115 hp cost?
The remap price for the Skoda Octavia 1.6 FSI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.