Skoda Octavia 1.9 TDI VP 110 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Octavia 1.9 TDI VP 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Octavia 1.9 TDI VP 110 hp ECU
Skoda Octavia (1997) 1.9 TDI VP 110 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 140 hp (+30 hp, +27%) and torque from 235 to 290 Nm (+55 Nm). ECU — Bosch EDC15VM+. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 1997 — the era of classic Common Rail without strong encryption.
Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Mid-range Skoda diesels are a mainstream chip tuning subject across Europe.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Octavia 1.9 TDI VP 110 hp?
Stage 1 chip tuning on the Skoda Octavia 1.9 TDI VP 110 hp boosts engine output by 30 hp: from 110 to 140 hp. Torque rises from 235 to 290 Nm (+55 Nm).
What changes in the Skoda Octavia ECU after Stage 1?
Stage 1 on the Skoda Octavia 1.9 TDI VP 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 TDI VP 110 hp?
Stage 1 on the Skoda Octavia 1.9 TDI VP 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Octavia 1.9 TDI VP 110 hp?
Stage 2 for the Skoda Octavia 1.9 TDI VP 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Skoda Octavia 1.9 TDI VP 110 hp run?
The control unit of the Skoda Octavia 1.9 TDI VP 110 hp is the Bosch EDC15VM+. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Skoda Octavia?
Stage 1 on the Skoda Octavia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Octavia 1.9 TDI VP 110 hp done?
The full remap cycle for the Skoda Octavia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Octavia?
The original Skoda Octavia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Octavia 1.9 TDI VP 110 hp?
The cost of Stage 1 for the Skoda Octavia 1.9 TDI VP 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.