Skoda Kushak 1.0 TSI 116 hp — Stage 1 file
hp
Stage 1 file for Skoda Kushak 1.0 TSI 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Kushak 1.0 TSI 116 hp ECU
Skoda Kushak (2021) 1.0 TSI 116 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). A 2021 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda RS range is a performance sub-brand with turbo engines and 4x4. The MQB platform allows ECU commonality with Volkswagen, Audi and Seat. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Kushak 1.0 TSI 116 hp?
Stage 1 for the Skoda Kushak 1.0 TSI 116 hp adds +0 hp — power increases from 116 to 116 hp (+0%). Torque rises from 175 to 175 Nm (+0 Nm).
What does a Stage 1 remap of the Skoda Kushak 1.0 TSI 116 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Kushak with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +0 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Kushak 1.0 TSI 116 hp?
A remap of the Skoda Kushak 1.0 TSI 116 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Kushak 1.0 TSI 116 hp?
Stage 2 for the Skoda Kushak 1.0 TSI 116 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Kushak remain valid after Stage 1?
After remapping the Skoda Kushak, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Kushak?
Reading and writing via OBD takes 25-30 minutes on the Skoda Kushak. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Kushak?
Before Stage 1 the original of the Skoda Kushak 1.0 TSI 116 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Kushak 1.0 TSI 116 hp cost?
The remap price for the Skoda Kushak 1.0 TSI 116 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.