Skoda Kodiaq 1.5 TSI eHybrid 204 hp — Stage 1 file (+96 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Skoda Kodiaq 1.5 TSI eHybrid 204 hp ECU

Skoda Kodiaq (2023) 1.5 TSI eHybrid 204 hp — mass-market hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 204 to 300 hp (+96 hp, +47%) and torque from 350 to 400 Nm (+50 Nm).

The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda Enyaq iV is the flagship electric crossover, built on the VAG MEB platform. On PHEV Skoda models, the ICE side is tuned just like a pure combustion engine. iV is Skoda's designation for its electric and PHEV models.

Protection on modern Skoda RS models is tight, so Bench is required. On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On Skoda RS models, Stage 1 works trouble-free on stock hardware. High-output Skoda engines are the RS range, with solid headroom for Stage 1.

Frequently asked questions

What power gain do you get after chip tuning the Skoda Kodiaq 1.5 TSI eHybrid 204 hp?

Stage 1 for the Skoda Kodiaq 1.5 TSI eHybrid 204 hp adds +96 hp — power increases from 204 to 300 hp (+47%). Torque rises from 350 to 400 Nm (+50 Nm).

What does a Stage 1 remap of the Skoda Kodiaq 1.5 TSI eHybrid 204 hp include?

Stage 1 on the Skoda Kodiaq 1.5 TSI eHybrid 204 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +96 hp with no hardware changes.

What does Stage 1 give on the powerful Skoda Kodiaq 1.5 TSI eHybrid 204 hp?

Stage 1 on the powerful Skoda Kodiaq 1.5 TSI eHybrid 204 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).

How does Stage 2 differ from Stage 1 on the Skoda Kodiaq 1.5 TSI eHybrid 204 hp?

Stage 2 for the Skoda Kodiaq 1.5 TSI eHybrid 204 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does Stage 1 void the warranty on the Skoda Kodiaq?

Stage 1 on the Skoda Kodiaq voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Skoda Kodiaq 1.5 TSI eHybrid 204 hp done?

The full remap cycle for the Skoda Kodiaq — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Skoda Kodiaq?

The original Skoda Kodiaq ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Skoda Kodiaq 1.5 TSI eHybrid 204 hp?

The cost of Stage 1 for the Skoda Kodiaq 1.5 TSI eHybrid 204 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 01.09.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno