Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp — Stage 1 file (+85 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp ECU

Skoda Kodiaq (2017) 45 TFSI (2.0) (skoda) 245 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 245 to 330 hp (+85 hp, +35%) and torque from 370 to 480 Nm (+110 Nm). ECU — Siemens/Continental Simos19.3. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.

Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. On high-output turbo-petrol Skoda RS engines, Stage 1 delivers a confident gain.

On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. High-output Skoda engines are the RS range, with solid headroom for Stage 1. On Skoda RS models, Stage 1 works trouble-free on stock hardware.

Frequently asked questions

How much horsepower does Stage 1 add for the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp?

The Stage 1 gain for the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp is 85 hp (+35%) over the stock 245 hp, for a total of 330 hp. Torque rises from 370 to 480 Nm (+110 Nm).

What is Stage 1 chip tuning for the Skoda Kodiaq?

Stage 1 on the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +85 hp with no hardware changes.

What does Stage 1 give on the powerful Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp?

The high-output Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp?

Stage 2 on the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp run?

The control unit of the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp is the Siemens/Continental Simos19.3. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Skoda Kodiaq?

Stage 1 on the Skoda Kodiaq voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp done?

The full remap cycle for the Skoda Kodiaq — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Skoda Kodiaq?

The original Skoda Kodiaq ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp?

The cost of Stage 1 for the Skoda Kodiaq 45 TFSI (2.0) (skoda) 245 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno