Skoda Kodiaq 2.0 TDI CR EU6 240 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Skoda Kodiaq 2.0 TDI CR EU6 240 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Kodiaq 2.0 TDI CR EU6 240 hp ECU
Skoda Kodiaq (2017) 2.0 TDI CR EU6 240 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 240 to 290 hp (+50 hp, +21%) and torque from 500 to 580 Nm (+80 Nm). The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The factory calibration of Skoda diesels is conservative, leaving headroom for Stage 1.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. High-output Skoda engines are the RS range, with solid headroom for Stage 1. On Skoda RS models, Stage 1 works trouble-free on stock hardware.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Kodiaq 2.0 TDI CR EU6 240 hp?
The Stage 1 gain for the Skoda Kodiaq 2.0 TDI CR EU6 240 hp is 50 hp (+21%) over the stock 240 hp, for a total of 290 hp. Torque rises from 500 to 580 Nm (+80 Nm).
What is Stage 1 chip tuning for the Skoda Kodiaq?
Stage 1 on the Skoda Kodiaq 2.0 TDI CR EU6 240 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
What does Stage 1 give on the powerful Skoda Kodiaq 2.0 TDI CR EU6 240 hp?
The high-output Skoda Kodiaq 2.0 TDI CR EU6 240 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Skoda Kodiaq 2.0 TDI CR EU6 240 hp?
Stage 2 on the Skoda Kodiaq 2.0 TDI CR EU6 240 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Skoda Kodiaq?
Stage 1 on the Skoda Kodiaq voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Kodiaq 2.0 TDI CR EU6 240 hp done?
The full remap cycle for the Skoda Kodiaq — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Kodiaq?
The original Skoda Kodiaq ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Kodiaq 2.0 TDI CR EU6 240 hp?
The cost of Stage 1 for the Skoda Kodiaq 2.0 TDI CR EU6 240 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.