Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp ECU
Skoda Kodiaq (2017) 1.4 TSI/TFSI S&S 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The MQB platform allows ECU commonality with Volkswagen, Audi and Seat.
On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
What is the Stage 1 effect on the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp?
The Stage 1 gain for the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp is 30 hp (+20%) over the stock 150 hp, for a total of 180 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Skoda Kodiaq?
Stage 1 chip tuning of the Skoda Kodiaq is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp?
Yes, Stage 1 for the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Kodiaq?
Stage 2 on the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp?
The Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp have?
The Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Kodiaq warranty after chip tuning?
The factory warranty of the Skoda Kodiaq does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Kodiaq take?
On the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Kodiaq?
Yes, the original ECU firmware of the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Kodiaq?
Stage 1 for the Skoda Kodiaq 1.4 TSI/TFSI S&S 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.