Skoda Kodiaq 1.0 TSI/TFSI 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Skoda Kodiaq 1.0 TSI/TFSI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Kodiaq 1.0 TSI/TFSI 115 hp ECU
Skoda Kodiaq (2017) 1.0 TSI/TFSI 115 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 200 to 240 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.1.27, Bosch MED17.5.21. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Skoda shares ECUs and calibration algorithms with VW.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Skoda Kodiaq 1.0 TSI/TFSI 115 hp reach after a remap?
The Stage 1 gain for the Skoda Kodiaq 1.0 TSI/TFSI 115 hp is 20 hp (+17%) over the stock 115 hp, for a total of 135 hp. Torque rises from 200 to 240 Nm (+40 Nm).
What is Stage 1 chip tuning for the Skoda Kodiaq?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Kodiaq with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Kodiaq 1.0 TSI/TFSI 115 hp?
A remap of the Skoda Kodiaq 1.0 TSI/TFSI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Kodiaq 1.0 TSI/TFSI 115 hp?
Stage 2 on the Skoda Kodiaq 1.0 TSI/TFSI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Kodiaq 1.0 TSI/TFSI 115 hp built with?
The Skoda Kodiaq 1.0 TSI/TFSI 115 hp comes with 2 ECU variants: Bosch MED17.1.27, Bosch MED17.5.21. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Skoda Kodiaq remain valid after Stage 1?
After remapping the Skoda Kodiaq, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Kodiaq?
Reading and writing via OBD takes 25-30 minutes on the Skoda Kodiaq. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Kodiaq?
Before Stage 1 the original of the Skoda Kodiaq 1.0 TSI/TFSI 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Kodiaq 1.0 TSI/TFSI 115 hp cost?
The remap price for the Skoda Kodiaq 1.0 TSI/TFSI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.