Skoda Kodiaq 1.0 TSI/TFSI 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Kodiaq 1.0 TSI/TFSI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Kodiaq 1.0 TSI/TFSI 110 hp ECU
Skoda Kodiaq (2017) 1.0 TSI/TFSI 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 200 to 240 Nm (+40 Nm). A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Kodiaq 1.0 TSI/TFSI 110 hp?
Stage 1 for the Skoda Kodiaq 1.0 TSI/TFSI 110 hp adds +25 hp — power increases from 110 to 135 hp (+23%). Torque rises from 200 to 240 Nm (+40 Nm).
What does a Stage 1 remap of the Skoda Kodiaq 1.0 TSI/TFSI 110 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Kodiaq with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Kodiaq 1.0 TSI/TFSI 110 hp?
A remap of the Skoda Kodiaq 1.0 TSI/TFSI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Kodiaq 1.0 TSI/TFSI 110 hp?
Stage 2 for the Skoda Kodiaq 1.0 TSI/TFSI 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Kodiaq remain valid after Stage 1?
After remapping the Skoda Kodiaq, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Kodiaq?
Reading and writing via OBD takes 25-30 minutes on the Skoda Kodiaq. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Kodiaq?
Before Stage 1 the original of the Skoda Kodiaq 1.0 TSI/TFSI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Kodiaq 1.0 TSI/TFSI 110 hp cost?
The remap price for the Skoda Kodiaq 1.0 TSI/TFSI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.