Skoda Karoq 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Karoq 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Karoq 1.5 TSI 150 hp ECU
Skoda Karoq (2017) 1.5 TSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions.
Frequently asked questions
How much does the power of the Skoda Karoq 1.5 TSI 150 hp increase after Stage 1?
Stage 1 for the Skoda Karoq 1.5 TSI 150 hp adds +25 hp — power increases from 150 to 175 hp (+17%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Skoda Karoq 1.5 TSI 150 hp include?
Stage 1 chip tuning of the Skoda Karoq is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Skoda Karoq 1.5 TSI 150 hp?
Yes, Stage 1 for the Skoda Karoq 1.5 TSI 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Karoq?
Stage 2 for the Skoda Karoq 1.5 TSI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Skoda Karoq 1.5 TSI 150 hp?
The Skoda Karoq 1.5 TSI 150 hp ECU is the Bosch MG1CS011. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
How many TCU units does the Skoda Karoq 1.5 TSI 150 hp have?
The Skoda Karoq 1.5 TSI 150 hp comes with 3 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Karoq warranty after chip tuning?
The factory warranty of the Skoda Karoq does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Karoq take?
On the Skoda Karoq 1.5 TSI 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Karoq?
Yes, the original ECU firmware of the Skoda Karoq 1.5 TSI 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Karoq?
Stage 1 for the Skoda Karoq 1.5 TSI 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.