Skoda Fabia 1.2 TSI S&S 90 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Skoda Fabia 1.2 TSI S&S 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Fabia 1.2 TSI S&S 90 hp ECU
Skoda Fabia (2015) 1.2 TSI S&S 90 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 90 to 130 hp (+40 hp, +44%) and torque from 160 to 220 Nm (+60 Nm). The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Mid-generation petrol models use standard OBD flash via MQB.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. In the Skoda city segment, Stage 1 is more about comfort than outright power. On low-output Skoda engines, Stage 1 is safe without overstressing the hardware. On naturally aspirated Skoda engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Skoda Fabia 1.2 TSI S&S 90 hp?
The Stage 1 gain for the Skoda Fabia 1.2 TSI S&S 90 hp is 40 hp (+44%) over the stock 90 hp, for a total of 130 hp. Torque rises from 160 to 220 Nm (+60 Nm).
What is Stage 1 chip tuning for the Skoda Fabia?
Stage 1 on the Skoda Fabia 1.2 TSI S&S 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is Stage 1 safe for the low-output Skoda Fabia 1.2 TSI S&S 90 hp?
Stage 1 on the base Skoda Fabia is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Skoda Fabia 1.2 TSI S&S 90 hp?
Stage 2 on the Skoda Fabia 1.2 TSI S&S 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Skoda Fabia?
Stage 1 on the Skoda Fabia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Fabia 1.2 TSI S&S 90 hp done?
The full remap cycle for the Skoda Fabia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Fabia?
The original Skoda Fabia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Fabia 1.2 TSI S&S 90 hp?
The cost of Stage 1 for the Skoda Fabia 1.2 TSI S&S 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.