Skoda Fabia 1.9 TDI IP 105 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Fabia 1.9 TDI IP 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Fabia 1.9 TDI IP 105 hp ECU
Skoda Fabia (2007) 1.9 TDI IP 105 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 105 to 140 hp (+35 hp, +33%) and torque from 250 to 320 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC16U1, Bosch EDC16U34. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. On older Skoda diesels, Stage 1 is flashed via OBD without any complications.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Fabia 1.9 TDI IP 105 hp?
The Stage 1 gain for the Skoda Fabia 1.9 TDI IP 105 hp is 35 hp (+33%) over the stock 105 hp, for a total of 140 hp. Torque rises from 250 to 320 Nm (+70 Nm).
What is Stage 1 chip tuning for the Skoda Fabia?
Stage 1 on the Skoda Fabia 1.9 TDI IP 105 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 TDI IP 105 hp?
Stage 1 on the Skoda Fabia 1.9 TDI IP 105 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Fabia 1.9 TDI IP 105 hp?
Stage 2 on the Skoda Fabia 1.9 TDI IP 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Skoda Fabia 1.9 TDI IP 105 hp have?
The Skoda Fabia 1.9 TDI IP 105 hp has 2 ECU variants: Bosch EDC16U1, Bosch EDC16U34. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Skoda Fabia?
Stage 1 on the Skoda Fabia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Fabia 1.9 TDI IP 105 hp done?
The full remap cycle for the Skoda Fabia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Fabia?
The original Skoda Fabia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Fabia 1.9 TDI IP 105 hp?
The cost of Stage 1 for the Skoda Fabia 1.9 TDI IP 105 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.