Seat Toledo 1.2 TSI S&S 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Seat Toledo 1.2 TSI S&S 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Toledo 1.2 TSI S&S 110 hp ECU
Seat Toledo (2012 - KG) 1.2 TSI S&S 110 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 175 to 250 Nm (+75 Nm). This engine ships with different ECU variants: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Seat is a Spanish carmaker from Barcelona, founded in 1950. FR is Seat's sporty trim package, the equivalent of VW's GTI-Line. The MQB platform allows ECU commonality with Volkswagen, Audi and Skoda. The factory calibration of Seat petrol engines is conservative, leaving headroom for Stage 1.
The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Seat, Stage 1 usually fits within the standard turnaround time. On standard Seat petrol engines, Stage 1 delivers a noticeable gain. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Seat community in Southern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Seat.
Frequently asked questions
How much horsepower does Stage 1 add for the Seat Toledo 1.2 TSI S&S 110 hp?
Stage 1 chip tuning on the Seat Toledo 1.2 TSI S&S 110 hp boosts engine output by 25 hp: from 110 to 135 hp. Torque rises from 175 to 250 Nm (+75 Nm).
What changes in the Seat Toledo ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Seat Toledo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Seat Toledo 1.2 TSI S&S 110 hp?
A remap of the Seat Toledo 1.2 TSI S&S 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Seat Toledo 1.2 TSI S&S 110 hp?
Stage 2 for the Seat Toledo 1.2 TSI S&S 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Seat Toledo 1.2 TSI S&S 110 hp built with?
The Seat Toledo 1.2 TSI S&S 110 hp comes with 3 ECU variants: Bosch MED17.5.21, Bosch MED17.5.25, Siemens/Continental Simos20.1.20. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Seat Toledo be calibrated?
The Seat Toledo 1.2 TSI S&S 110 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Seat Toledo remain valid after Stage 1?
After remapping the Seat Toledo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Seat Toledo?
Reading and writing via OBD takes 25-30 minutes on the Seat Toledo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Seat Toledo?
Before Stage 1 the original of the Seat Toledo 1.2 TSI S&S 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Seat Toledo 1.2 TSI S&S 110 hp cost?
The remap price for the Seat Toledo 1.2 TSI S&S 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.