Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp ECU
Seat Leon (2017 - 5F MK2) 1.4 TSI/TFSI S&S (2013) 125 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 125 to 155 hp (+30 hp, +24%) and torque from 200 to 250 Nm (+50 Nm). ECU — Bosch MED17.5.25. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 3 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Cupra is Seat's performance division, a standalone sub-brand since 2018. FR is Seat's sporty trim package, the equivalent of VW's GTI-Line. The MQB platform allows ECU commonality with Volkswagen, Audi and Skoda. The factory calibration of Seat petrol engines is conservative, leaving headroom for Stage 1.
On pre-2017 Seat models, Stage 1 is done via OBD without bench. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Seat, Stage 1 usually fits within the standard turnaround time. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Seat community in Southern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Seat.
Frequently asked questions
How many horsepower does the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp reach after a remap?
Stage 1 chip tuning on the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp boosts engine output by 30 hp: from 125 to 155 hp. Torque rises from 200 to 250 Nm (+50 Nm).
What changes in the Seat Leon ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Seat Leon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp?
A remap of the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp?
Stage 2 for the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp use?
The Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp is fitted with the Bosch MED17.5.25 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Seat Leon be calibrated?
The Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Seat Leon remain valid after Stage 1?
After remapping the Seat Leon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Seat Leon?
Reading and writing via OBD takes 25-30 minutes on the Seat Leon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Seat Leon?
Before Stage 1 the original of the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp cost?
The remap price for the Seat Leon 1.4 TSI/TFSI S&S (2013) 125 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.