Seat Leon 1.9 TDI IP 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Seat Leon 1.9 TDI IP 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Leon 1.9 TDI IP 130 hp ECU
Seat Leon (1999 - 1M) 1.9 TDI IP 130 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 310 to 365 Nm (+55 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. The 1999 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Seat has historically shared platforms and engines with Volkswagen and Skoda. DPF/SCR with AdBlue is standard on all Euro-6 Seat diesels. The factory calibration of Seat diesels is conservative, leaving headroom for Stage 1. Mid-range Seat diesels are a mainstream chip tuning subject.
On Seat, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Seat files often work on VW/Audi/Skoda. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The MQB platform is the most refined chip tuning segment in Europe. The Seat community in Southern Europe offers a large pool of ready-made Stage files. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life.
Frequently asked questions
How much does the power of the Seat Leon 1.9 TDI IP 130 hp increase after Stage 1?
The Stage 1 gain for the Seat Leon 1.9 TDI IP 130 hp is 30 hp (+23%) over the stock 130 hp, for a total of 160 hp. Torque rises from 310 to 365 Nm (+55 Nm).
What is Stage 1 chip tuning for the Seat Leon?
Stage 1 chip tuning of the Seat Leon is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Seat Leon 1.9 TDI IP 130 hp?
Yes, Stage 1 for the Seat Leon 1.9 TDI IP 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Seat Leon?
Stage 2 on the Seat Leon 1.9 TDI IP 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Seat Leon 1.9 TDI IP 130 hp?
The Seat Leon 1.9 TDI IP 130 hp ECU is the Bosch EDC15P+. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Seat Leon warranty after chip tuning?
The factory warranty of the Seat Leon does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Seat Leon take?
On the Seat Leon 1.9 TDI IP 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Seat Leon?
Yes, the original ECU firmware of the Seat Leon 1.9 TDI IP 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Seat Leon?
Stage 1 for the Seat Leon 1.9 TDI IP 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.