Seat Ibiza 1.9 TDI IP 90 hp — Stage 1 file (+50 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Seat Ibiza 1.9 TDI IP 90 hp ECU

Seat Ibiza (2008 - 6J) 1.9 TDI IP 90 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 90 to 140 hp (+50 hp, +56%) and torque from 210 to 320 Nm (+110 Nm). ECU — Bosch EDC15. Flashing method: OBD or Bench depending on the unit's protection. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Seat has been part of the Volkswagen Group (VAG) since 1986. On low-output Seat diesels, Stage 1 is safe. On older Seat diesels, Stage 1 is a straightforward OBD job. TDI is Seat's turbo-diesel designation, shared with Volkswagen and Audi.

On Seat, Stage 1 usually fits within the standard turnaround time. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Within the VAG group, ECUs are standardised, so Seat files often work on VW/Audi/Skoda. On low-output Seat engines, Stage 1 is safe. On naturally aspirated Seat engines, the main effect is on throttle response. In the Seat city segment, Stage 1 is more about comfort.

Frequently asked questions

How much does the power of the Seat Ibiza 1.9 TDI IP 90 hp increase after Stage 1?

After Stage 1 the power of the Seat Ibiza 1.9 TDI IP 90 hp rises from 90 to 140 hp, a gain of 50 hp (+56%). Torque rises from 210 to 320 Nm (+110 Nm).

How does Stage 1 differ from stock on the Seat Ibiza?

Stage 1 is a software optimization of the factory ECU firmware of the Seat Ibiza with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.

Is Stage 1 worth doing on the base Seat Ibiza?

Stage 1 on the base Seat Ibiza is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.

What is Stage 2 for the Seat Ibiza 1.9 TDI IP 90 hp?

Stage 2 on the Seat Ibiza 1.9 TDI IP 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What ECU platform does the Seat Ibiza 1.9 TDI IP 90 hp use?

The Seat Ibiza 1.9 TDI IP 90 hp is fitted with the Bosch EDC15 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

Does the factory warranty of the Seat Ibiza remain valid after Stage 1?

After remapping the Seat Ibiza, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Seat Ibiza?

Reading and writing via OBD takes 25-30 minutes on the Seat Ibiza. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Seat Ibiza?

Before Stage 1 the original of the Seat Ibiza 1.9 TDI IP 90 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Seat Ibiza 1.9 TDI IP 90 hp cost?

The remap price for the Seat Ibiza 1.9 TDI IP 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno