Seat Exeo 2.0 TDI CR 120 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Seat Exeo 2.0 TDI CR 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Exeo 2.0 TDI CR 120 hp ECU
Seat Exeo (2009) 2.0 TDI CR 120 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 120 to 185 hp (+65 hp, +54%) and torque from 290 to 410 Nm (+120 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250C, Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
Seat's slogan, “Created in Barcelona”, highlights the brand's Spanish character. The Seat diesel range is fully shared with VW on the MQB platform. DPF/SCR with AdBlue is standard on all Euro-6 Seat diesels. The factory calibration of Seat diesels is conservative, leaving headroom for Stage 1.
Within the VAG group, ECUs are standardised, so Seat files often work on VW/Audi/Skoda. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Seat diesels, Stage 1 delivers a noticeable torque gain. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Seat community in Southern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Seat.
Frequently asked questions
How much horsepower does Stage 1 add for the Seat Exeo 2.0 TDI CR 120 hp?
Stage 1 chip tuning on the Seat Exeo 2.0 TDI CR 120 hp boosts engine output by 65 hp: from 120 to 185 hp. Torque rises from 290 to 410 Nm (+120 Nm).
What changes in the Seat Exeo ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Seat Exeo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +65 hp with no hardware changes.
What is the risk of Stage 1 on the Seat Exeo 2.0 TDI CR 120 hp?
A remap of the Seat Exeo 2.0 TDI CR 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Seat Exeo 2.0 TDI CR 120 hp?
Stage 2 for the Seat Exeo 2.0 TDI CR 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Seat Exeo 2.0 TDI CR 120 hp built with?
The Seat Exeo 2.0 TDI CR 120 hp comes with 3 ECU variants: Bosch EDC17C46, Bosch EDC17CP14, Bosch EDC17CP20. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ250C, Temic DQ250E, Temic DQ250F) on the Seat Exeo be calibrated?
The Seat Exeo 2.0 TDI CR 120 hp has 3 TCU variants: Temic DQ250C, Temic DQ250E, Temic DQ250F. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Seat Exeo remain valid after Stage 1?
After remapping the Seat Exeo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Seat Exeo?
Reading and writing via OBD takes 25-30 minutes on the Seat Exeo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Seat Exeo?
Before Stage 1 the original of the Seat Exeo 2.0 TDI CR 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Seat Exeo 2.0 TDI CR 120 hp cost?
The remap price for the Seat Exeo 2.0 TDI CR 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.