Seat Exeo 1.8 TSI TFSI 160 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Seat Exeo 1.8 TSI TFSI 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Exeo 1.8 TSI TFSI 160 hp ECU
Seat Exeo (2009) 1.8 TSI TFSI 160 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 160 to 210 hp (+50 hp, +31%) and torque from 250 to 320 Nm (+70 Nm). This engine ships with different ECU variants: Bosch MED17.5, Bosch MED17.5.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The Temic DQ200 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Seat has been part of the Volkswagen Group (VAG) since 1986. TSI is Seat's petrol turbo engine designation, shared with VW. FR is Seat's sporty trim package, the equivalent of VW's GTI-Line. The MQB platform allows ECU commonality with Volkswagen, Audi and Skoda.
The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On standard Seat petrol engines, Stage 1 delivers a noticeable gain. On Seat, Stage 1 usually fits within the standard turnaround time. The Seat community in Southern Europe offers a large pool of ready-made Stage files. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
The DSG is VAG's signature dual-clutch gearbox, fitted to Seat. The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions.
Frequently asked questions
How many horsepower does the Seat Exeo 1.8 TSI TFSI 160 hp reach after a remap?
After Stage 1 the power of the Seat Exeo 1.8 TSI TFSI 160 hp rises from 160 to 210 hp, a gain of 50 hp (+31%). Torque rises from 250 to 320 Nm (+70 Nm).
How does Stage 1 differ from stock on the Seat Exeo?
Stage 1 on the Seat Exeo 1.8 TSI TFSI 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.8 TSI TFSI 160 hp?
Stage 1 on the Seat Exeo 1.8 TSI TFSI 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Seat Exeo 1.8 TSI TFSI 160 hp?
Stage 2 on the Seat Exeo 1.8 TSI TFSI 160 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Seat Exeo 1.8 TSI TFSI 160 hp have?
The Seat Exeo 1.8 TSI TFSI 160 hp has 2 ECU variants: Bosch MED17.5, Bosch MED17.5.2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the Temic DQ200 transmission need calibration after Stage 1 on the Seat Exeo?
Remapping the Temic DQ200 gearbox is essential to fully unlock Stage 1 on the Seat Exeo 1.8 TSI TFSI 160 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Seat Exeo?
Stage 1 on the Seat Exeo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Seat Exeo 1.8 TSI TFSI 160 hp done?
The full remap cycle for the Seat Exeo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Seat Exeo?
The original Seat Exeo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Seat Exeo 1.8 TSI TFSI 160 hp?
The cost of Stage 1 for the Seat Exeo 1.8 TSI TFSI 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.