Seat Cordoba 1.9 TDI VP 90 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Seat Cordoba 1.9 TDI VP 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Cordoba 1.9 TDI VP 90 hp ECU
Seat Cordoba (1993) 1.9 TDI VP 90 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 90 to 120 hp (+30 hp, +33%) and torque from 210 to 265 Nm (+55 Nm). ECU — Bosch EDC15VM+. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 1993 — the era of classic Common Rail without strong encryption.
The Seat range covers compacts, saloons and crossovers. The Seat diesel range is fully shared with VW on the MQB platform. DPF/SCR with AdBlue is standard on all Euro-6 Seat diesels. The factory calibration of Seat diesels is conservative, leaving headroom for Stage 1.
On Seat, Stage 1 usually fits within the standard turnaround time. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Within the VAG group, ECUs are standardised, so Seat files often work on VW/Audi/Skoda. On low-output Seat engines, Stage 1 is safe. On naturally aspirated Seat engines, the main effect is on throttle response. In the Seat city segment, Stage 1 is more about comfort.
Frequently asked questions
How much horsepower does Stage 1 add for the Seat Cordoba 1.9 TDI VP 90 hp?
Stage 1 for the Seat Cordoba 1.9 TDI VP 90 hp adds +30 hp — power increases from 90 to 120 hp (+33%). Torque rises from 210 to 265 Nm (+55 Nm).
What does a Stage 1 remap of the Seat Cordoba 1.9 TDI VP 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Seat Cordoba with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Is Stage 1 worth doing on the base Seat Cordoba?
Yes, Stage 1 on the low-output Seat Cordoba 1.9 TDI VP 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Seat Cordoba 1.9 TDI VP 90 hp?
Stage 2 for the Seat Cordoba 1.9 TDI VP 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Seat Cordoba 1.9 TDI VP 90 hp use?
The Seat Cordoba 1.9 TDI VP 90 hp is fitted with the Bosch EDC15VM+ ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Seat Cordoba remain valid after Stage 1?
After remapping the Seat Cordoba, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Seat Cordoba?
Reading and writing via OBD takes 25-30 minutes on the Seat Cordoba. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Seat Cordoba?
Before Stage 1 the original of the Seat Cordoba 1.9 TDI VP 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Seat Cordoba 1.9 TDI VP 90 hp cost?
The remap price for the Seat Cordoba 1.9 TDI VP 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.