Seat Alhambra 1.9 TDI IP 115 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Seat Alhambra 1.9 TDI IP 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Seat Alhambra 1.9 TDI IP 115 hp ECU
Seat Alhambra (1999) 1.9 TDI IP 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Испания, 1950). Stage 1 chip tuning raises power from 115 to 146 hp (+31 hp, +27%) and torque from 285 to 350 Nm (+65 Nm). This engine ships with different ECU variants: Bosch EDC15P+, Bosch EDC16U31. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 1999 — the era of classic Common Rail without strong encryption.
Seat is a Spanish carmaker from Barcelona, founded in 1950. The Seat diesel range is fully shared with VW on the MQB platform. DPF/SCR with AdBlue is standard on all Euro-6 Seat diesels. The factory calibration of Seat diesels is conservative, leaving headroom for Stage 1.
Within the VAG group, ECUs are standardised, so Seat files often work on VW/Audi/Skoda. The Seat community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Seat diesels, Stage 1 delivers a noticeable torque gain. Mid-range Seat engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Seat community in Southern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Seat Alhambra 1.9 TDI IP 115 hp?
Stage 1 chip tuning on the Seat Alhambra 1.9 TDI IP 115 hp boosts engine output by 31 hp: from 115 to 146 hp. Torque rises from 285 to 350 Nm (+65 Nm).
What changes in the Seat Alhambra ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Seat Alhambra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Seat Alhambra 1.9 TDI IP 115 hp?
A remap of the Seat Alhambra 1.9 TDI IP 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Seat Alhambra 1.9 TDI IP 115 hp?
Stage 2 for the Seat Alhambra 1.9 TDI IP 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Seat Alhambra 1.9 TDI IP 115 hp built with?
The Seat Alhambra 1.9 TDI IP 115 hp comes with 2 ECU variants: Bosch EDC15P+, Bosch EDC16U31. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Seat Alhambra remain valid after Stage 1?
After remapping the Seat Alhambra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Seat Alhambra?
Reading and writing via OBD takes 25-30 minutes on the Seat Alhambra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Seat Alhambra?
Before Stage 1 the original of the Seat Alhambra 1.9 TDI IP 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Seat Alhambra 1.9 TDI IP 115 hp cost?
The remap price for the Seat Alhambra 1.9 TDI IP 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.