SAME Iron 200 204hp (150kW) 820Nm — Stage 1 file (+48 hp)
hp
Stage 1 file for SAME Iron 200 204hp (150kW) 820Nm
Target +0 hp. Custom development for your engine.
Chip tuning for SAME Iron 200 204hp (150kW) 820Nm ECU
SAME Iron (I) 200 204hp (150kW) 820Nm — agricultural diesel engine of the agricultural segment of the SDF Group (Same Deutz-Fahr) group (Италия, 1942). Stage 1 chip tuning raises power from 204 to 252 hp (+48 hp, +24%) and torque from 820 to 1030 Nm (+210 Nm).
SAME is an Italian tractor manufacturer, founded in 1942. SAME is part of the SDF Group alongside Deutz-Fahr and Lamborghini Trattori. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные SAME — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much does the power of the SAME Iron 200 204hp (150kW) 820Nm increase after Stage 1?
The Stage 1 gain for the SAME Iron 200 204hp (150kW) 820Nm is 48 hp (+24%) over the stock 204 hp, for a total of 252 hp. Torque rises from 820 to 1030 Nm (+210 Nm).
What is Stage 1 chip tuning for the SAME Iron?
Stage 1 is a software optimization of the factory ECU firmware of the SAME Iron with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the SAME Iron?
The high-output SAME Iron 200 204hp (150kW) 820Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the SAME Iron 200 204hp (150kW) 820Nm?
Stage 2 on the SAME Iron 200 204hp (150kW) 820Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the SAME Iron remain valid after Stage 1?
After remapping the SAME Iron, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the SAME Iron?
Reading and writing via OBD takes 25-30 minutes on the SAME Iron. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the SAME Iron?
Before Stage 1 the original of the SAME Iron 200 204hp (150kW) 820Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the SAME Iron 200 204hp (150kW) 820Nm cost?
The remap price for the SAME Iron 200 204hp (150kW) 820Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.