SAME Iron 160 163hp (120kW) 655Nm — Stage 1 file (+27 hp)
hp
Stage 1 file for SAME Iron 160 163hp (120kW) 655Nm
Target +0 hp. Custom development for your engine.
Chip tuning for SAME Iron 160 163hp (120kW) 655Nm ECU
SAME Iron (I) 160 163hp (120kW) 655Nm — agricultural diesel engine of the agricultural segment of the SDF Group (Same Deutz-Fahr) group (Италия, 1942). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 655 to 730 Nm (+75 Nm).
SAME is an Italian tractor manufacturer, founded in 1942. SAME is part of the SDF Group alongside Deutz-Fahr and Lamborghini Trattori. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. SAME среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the SAME Iron 160 163hp (120kW) 655Nm?
After Stage 1 the power of the SAME Iron 160 163hp (120kW) 655Nm rises from 163 to 190 hp, a gain of 27 hp (+17%). Torque rises from 655 to 730 Nm (+75 Nm).
How does Stage 1 differ from stock on the SAME Iron?
Stage 1 is a software optimization of the factory ECU firmware of the SAME Iron with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +27 hp with no hardware changes.
What is the risk of Stage 1 on the SAME Iron 160 163hp (120kW) 655Nm?
A remap of the SAME Iron 160 163hp (120kW) 655Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the SAME Iron 160 163hp (120kW) 655Nm?
Stage 2 on the SAME Iron 160 163hp (120kW) 655Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the SAME Iron remain valid after Stage 1?
After remapping the SAME Iron, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the SAME Iron?
Reading and writing via OBD takes 25-30 minutes on the SAME Iron. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the SAME Iron?
Before Stage 1 the original of the SAME Iron 160 163hp (120kW) 655Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the SAME Iron 160 163hp (120kW) 655Nm cost?
The remap price for the SAME Iron 160 163hp (120kW) 655Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.