SAME Iron 150 150hp (110kW) 556Nm — Stage 1 file (+34 hp)
hp
Stage 1 file for SAME Iron 150 150hp (110kW) 556Nm
Target +0 hp. Custom development for your engine.
Chip tuning for SAME Iron 150 150hp (110kW) 556Nm ECU
SAME Iron (I) 150 150hp (110kW) 556Nm — agricultural diesel engine of the agricultural segment of the SDF Group (Same Deutz-Fahr) group (Италия, 1942). Stage 1 chip tuning raises power from 150 to 184 hp (+34 hp, +23%) and torque from 556 to 618 Nm (+62 Nm).
SAME is part of the SDF Group alongside Deutz-Fahr and Lamborghini Trattori. SAME is an Italian tractor manufacturer, founded in 1942. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. SAME среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the SAME Iron 150 150hp (110kW) 556Nm reach after a remap?
Stage 1 for the SAME Iron 150 150hp (110kW) 556Nm adds +34 hp — power increases from 150 to 184 hp (+23%). Torque rises from 556 to 618 Nm (+62 Nm).
What does a Stage 1 remap of the SAME Iron 150 150hp (110kW) 556Nm include?
Stage 1 on the SAME Iron 150 150hp (110kW) 556Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +34 hp with no hardware changes.
Is a Stage 1 remap safe for the 150 150hp (110kW) 556Nm?
Stage 1 on the SAME Iron 150 150hp (110kW) 556Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the SAME Iron 150 150hp (110kW) 556Nm?
Stage 2 for the SAME Iron 150 150hp (110kW) 556Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the SAME Iron?
Stage 1 on the SAME Iron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the SAME Iron 150 150hp (110kW) 556Nm done?
The full remap cycle for the SAME Iron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the SAME Iron?
The original SAME Iron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the SAME Iron 150 150hp (110kW) 556Nm?
The cost of Stage 1 for the SAME Iron 150 150hp (110kW) 556Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.