SAME Iron 140 143hp (105kW) 574Nm — Stage 1 file (+26 hp)
hp
Stage 1 file for SAME Iron 140 143hp (105kW) 574Nm
Target +0 hp. Custom development for your engine.
Chip tuning for SAME Iron 140 143hp (105kW) 574Nm ECU
SAME Iron (I) 140 143hp (105kW) 574Nm — agricultural diesel engine of the agricultural segment of the SDF Group (Same Deutz-Fahr) group (Италия, 1942). Stage 1 chip tuning raises power from 143 to 169 hp (+26 hp, +18%) and torque from 574 to 648 Nm (+74 Nm).
SAME is an Italian tractor manufacturer, founded in 1942. SAME is part of the SDF Group alongside Deutz-Fahr and Lamborghini Trattori. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. SAME среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the SAME Iron 140 143hp (105kW) 574Nm?
After Stage 1 the power of the SAME Iron 140 143hp (105kW) 574Nm rises from 143 to 169 hp, a gain of 26 hp (+18%). Torque rises from 574 to 648 Nm (+74 Nm).
How does Stage 1 differ from stock on the SAME Iron?
Stage 1 on the SAME Iron 140 143hp (105kW) 574Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +26 hp with no hardware changes.
Is a Stage 1 remap safe for the 140 143hp (105kW) 574Nm?
Stage 1 on the SAME Iron 140 143hp (105kW) 574Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the SAME Iron 140 143hp (105kW) 574Nm?
Stage 2 on the SAME Iron 140 143hp (105kW) 574Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the SAME Iron?
Stage 1 on the SAME Iron voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the SAME Iron 140 143hp (105kW) 574Nm done?
The full remap cycle for the SAME Iron — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the SAME Iron?
The original SAME Iron ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the SAME Iron 140 143hp (105kW) 574Nm?
The cost of Stage 1 for the SAME Iron 140 143hp (105kW) 574Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.