SAME Diamond 270 269hp (198kW) 1052Nm — Stage 1 file (+39 hp)
hp
Stage 1 file for SAME Diamond 270 269hp (198kW) 1052Nm
Target +0 hp. Custom development for your engine.
Chip tuning for SAME Diamond 270 269hp (198kW) 1052Nm ECU
SAME Diamond (I) 270 269hp (198kW) 1052Nm — agricultural diesel engine of the agricultural segment of the SDF Group (Same Deutz-Fahr) group (Италия, 1942). Stage 1 chip tuning raises power from 269 to 308 hp (+39 hp, +14%) and torque from 1052 to 1295 Nm (+243 Nm).
SAME is part of the SDF Group alongside Deutz-Fahr and Lamborghini Trattori. SAME is an Italian tractor manufacturer, founded in 1942. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные SAME — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the SAME Diamond 270 269hp (198kW) 1052Nm?
Stage 1 for the SAME Diamond 270 269hp (198kW) 1052Nm adds +39 hp — power increases from 269 to 308 hp (+14%). Torque rises from 1052 to 1295 Nm (+243 Nm).
What does a Stage 1 remap of the SAME Diamond 270 269hp (198kW) 1052Nm include?
Stage 1 on the SAME Diamond 270 269hp (198kW) 1052Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.
What does Stage 1 give on the powerful SAME Diamond 270 269hp (198kW) 1052Nm?
Stage 1 on the powerful SAME Diamond 270 269hp (198kW) 1052Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the SAME Diamond 270 269hp (198kW) 1052Nm?
Stage 2 for the SAME Diamond 270 269hp (198kW) 1052Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the SAME Diamond?
Stage 1 on the SAME Diamond voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the SAME Diamond 270 269hp (198kW) 1052Nm done?
The full remap cycle for the SAME Diamond — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the SAME Diamond?
The original SAME Diamond ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the SAME Diamond 270 269hp (198kW) 1052Nm?
The cost of Stage 1 for the SAME Diamond 270 269hp (198kW) 1052Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.