Saab 9-5 2.0 TiD 160 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Saab 9-5 2.0 TiD 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Saab 9-5 2.0 TiD 160 hp ECU
Saab 9-5 (2010) 2.0 TiD 160 hp — premium diesel engine of the passenger segment of the Legacy (закрыт в 2014, исторически General Motors) group (Швеция, 1937). Stage 1 chip tuning raises power from 160 to 200 hp (+40 hp, +25%) and torque from 350 to 420 Nm (+70 Nm). The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Saab Aero is the performance range with high-output turbo engines. Saab was a Swedish carmaker, founded in 1937 and closed in 2014. Saab was part of General Motors from 1990 to 2010. Saab used Opel/GM TID diesels.
The Saab community is a narrow niche, mainly in Scandinavia. Maptun is Saab's leading tuning partner. Mid-range Saab models sit in the turbo Aero segment, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Saab 9-5 2.0 TiD 160 hp reach after a remap?
The Stage 1 gain for the Saab 9-5 2.0 TiD 160 hp is 40 hp (+25%) over the stock 160 hp, for a total of 200 hp. Torque rises from 350 to 420 Nm (+70 Nm).
What is Stage 1 chip tuning for the Saab 9-5?
Stage 1 on the Saab 9-5 2.0 TiD 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TiD 160 hp?
Stage 1 on the Saab 9-5 2.0 TiD 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Saab 9-5 2.0 TiD 160 hp?
Stage 2 on the Saab 9-5 2.0 TiD 160 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Saab 9-5?
Stage 1 on the Saab 9-5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Saab 9-5 2.0 TiD 160 hp done?
The full remap cycle for the Saab 9-5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Saab 9-5?
The original Saab 9-5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Saab 9-5 2.0 TiD 160 hp?
The cost of Stage 1 for the Saab 9-5 2.0 TiD 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.