Rover 25 2.0 TD 101 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Rover 25 2.0 TD 101 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Rover 25 2.0 TD 101 hp ECU
Rover 25 (1999) 2.0 TD 101 hp — mass-market diesel engine of the passenger segment of the Legacy (закрыт в 2005) group (Великобритания, 1878). Stage 1 chip tuning raises power from 101 to 126 hp (+25 hp, +25%) and torque from 240 to 280 Nm (+40 Nm). Diesel engines built in 1999 — the era of classic Common Rail without strong encryption.
MG (Rover) is the division acquired by SAIC in 2005. Rover was a British carmaker (1878-2005). Rover is a legacy brand, an iconic British maker of mainstream saloons. Rover used BMW diesels alongside its own L-series engines.
The Rover community is a legacy niche, mainly focused on classics. Mid-range Rover models belong to a legacy segment.
Frequently asked questions
How many horsepower does the Rover 25 2.0 TD 101 hp reach after a remap?
Stage 1 for the Rover 25 2.0 TD 101 hp adds +25 hp — power increases from 101 to 126 hp (+25%). Torque rises from 240 to 280 Nm (+40 Nm).
What does a Stage 1 remap of the Rover 25 2.0 TD 101 hp include?
Stage 1 on the Rover 25 2.0 TD 101 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TD 101 hp?
Stage 1 on the Rover 25 2.0 TD 101 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Rover 25 2.0 TD 101 hp?
Stage 2 for the Rover 25 2.0 TD 101 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Rover 25?
Stage 1 on the Rover 25 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Rover 25 2.0 TD 101 hp done?
The full remap cycle for the Rover 25 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Rover 25?
The original Rover 25 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Rover 25 2.0 TD 101 hp?
The cost of Stage 1 for the Rover 25 2.0 TD 101 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.