Rolls Royce Dawn 6.75 V12 Turbo 571 hp — Stage 1 file (+89 hp)
hp
Stage 1 file for Rolls Royce Dawn 6.75 V12 Turbo 571 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Rolls Royce Dawn 6.75 V12 Turbo 571 hp ECU
Rolls Royce Dawn (2015) 6.75 V12 Turbo 571 hp — luxury petrol engine of the passenger segment of the BMW Group (с 1998) group (Великобритания, 1904). Stage 1 chip tuning raises power from 571 to 660 hp (+89 hp, +16%) and torque from 850 to 1050 Nm (+200 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
Rolls-Royce has been owned by the BMW Group since 1998. Rolls-Royce is a British ultra-luxury manufacturer, founded in 1904. Rolls-Royce uses BMW V12 engines for its top models. Rolls-Royce sits in the premium-luxury, high-power segment. Rolls-Royce uses BMW engines (V12 BiTurbo).
Rolls-Royce occupies the ultra-premium chip tuning segment, with bespoke programmes. Top-tier Rolls-Royce engines belong to the ultra-premium power segment.
Frequently asked questions
How much horsepower does Stage 1 add for the Rolls Royce Dawn 6.75 V12 Turbo 571 hp?
Stage 1 chip tuning on the Rolls Royce Dawn 6.75 V12 Turbo 571 hp boosts engine output by 89 hp: from 571 to 660 hp. Torque rises from 850 to 1050 Nm (+200 Nm).
What changes in the Rolls Royce Dawn ECU after Stage 1?
Stage 1 on the Rolls Royce Dawn 6.75 V12 Turbo 571 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +89 hp with no hardware changes.
What does Stage 1 give on the top-spec Rolls Royce Dawn 6.75 V12 Turbo 571 hp?
On the top-spec Rolls Royce Dawn 6.75 V12 Turbo 571 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Rolls Royce Dawn 6.75 V12 Turbo 571 hp?
Stage 2 for the Rolls Royce Dawn 6.75 V12 Turbo 571 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Rolls Royce Dawn?
Stage 1 on the Rolls Royce Dawn voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Rolls Royce Dawn 6.75 V12 Turbo 571 hp done?
The full remap cycle for the Rolls Royce Dawn — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Rolls Royce Dawn?
The original Rolls Royce Dawn ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Rolls Royce Dawn 6.75 V12 Turbo 571 hp?
The cost of Stage 1 for the Rolls Royce Dawn 6.75 V12 Turbo 571 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.