Renault Twingo 1.0 SCe 73 hp — Stage 1 file (+4 hp)
hp
Stage 1 file for Renault Twingo 1.0 SCe 73 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Twingo 1.0 SCe 73 hp ECU
Renault Twingo (2014) 1.0 SCe 73 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 73 to 77 hp (+4 hp, +5%) and torque from 97 to 100 Nm (+3 Nm). ECU — Bosch ME17.9.20. Flashing method: OBD or Bench depending on the unit's protection. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Renault is the core of the Renault-Nissan-Mitsubishi Alliance (formed in 1999 and expanded in 2016). TCe is Renault's signature designation for its petrol turbo engines. Low-output Renault petrol engines are naturally aspirated city-segment units; the gain is modest. Renault's petrol range is shared with Nissan and Dacia within the Alliance.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Twingo 1.0 SCe 73 hp?
After Stage 1 the power of the Renault Twingo 1.0 SCe 73 hp rises from 73 to 77 hp, a gain of 4 hp (+5%). Torque rises from 97 to 100 Nm (+3 Nm).
How does Stage 1 differ from stock on the Renault Twingo?
Stage 1 on the Renault Twingo 1.0 SCe 73 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +4 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Twingo 1.0 SCe 73 hp?
Stage 1 on the base Renault Twingo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Renault Twingo 1.0 SCe 73 hp?
Stage 2 on the Renault Twingo 1.0 SCe 73 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Renault Twingo 1.0 SCe 73 hp run?
The control unit of the Renault Twingo 1.0 SCe 73 hp is the Bosch ME17.9.20. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Renault Twingo?
Stage 1 on the Renault Twingo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Twingo 1.0 SCe 73 hp done?
The full remap cycle for the Renault Twingo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Twingo?
The original Renault Twingo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Twingo 1.0 SCe 73 hp?
The cost of Stage 1 for the Renault Twingo 1.0 SCe 73 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.