Renault Twingo 0.9 TCE (Brabus) 109 hp — Stage 1 file (+11 hp)
hp
Stage 1 file for Renault Twingo 0.9 TCE (Brabus) 109 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Twingo 0.9 TCE (Brabus) 109 hp ECU
Renault Twingo (2014) 0.9 TCE (Brabus) 109 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 109 to 120 hp (+11 hp, +10%) and torque from 170 to 200 Nm (+30 Nm). A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
Renault Sport is the performance division that builds RS models and the Megane Sport. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants.
On Renault petrol engines, Stage 1 delivers a noticeable gain. On older-generation Renault models, Stage 1 is done via OBD without bench. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
How many horsepower does the Renault Twingo 0.9 TCE (Brabus) 109 hp reach after a remap?
Stage 1 for the Renault Twingo 0.9 TCE (Brabus) 109 hp adds +11 hp — power increases from 109 to 120 hp (+10%). Torque rises from 170 to 200 Nm (+30 Nm).
What does a Stage 1 remap of the Renault Twingo 0.9 TCE (Brabus) 109 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Twingo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +11 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Twingo 0.9 TCE (Brabus) 109 hp?
A remap of the Renault Twingo 0.9 TCE (Brabus) 109 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Twingo 0.9 TCE (Brabus) 109 hp?
Stage 2 for the Renault Twingo 0.9 TCE (Brabus) 109 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Renault Twingo remain valid after Stage 1?
After remapping the Renault Twingo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Twingo?
Reading and writing via OBD takes 25-30 minutes on the Renault Twingo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Twingo?
Before Stage 1 the original of the Renault Twingo 0.9 TCE (Brabus) 109 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Twingo 0.9 TCE (Brabus) 109 hp cost?
The remap price for the Renault Twingo 0.9 TCE (Brabus) 109 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.