Renault Talisman 1.7 Blue dCi 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Renault Talisman 1.7 Blue dCi 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Talisman 1.7 Blue dCi 150 hp ECU
Renault Talisman (2020) 1.7 Blue dCi 150 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 340 to 380 Nm (+40 Nm). ECU — Bosch MD1CS006. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2020 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Alpine is Renault's performance sub-brand for the premium segment. Mid-range Renault diesels are a mainstream chip tuning subject across Europe.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. On modern Renault models, Bench is often needed for the top models. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
What power gain do you get after chip tuning the Renault Talisman 1.7 Blue dCi 150 hp?
After Stage 1 the power of the Renault Talisman 1.7 Blue dCi 150 hp rises from 150 to 180 hp, a gain of 30 hp (+20%). Torque rises from 340 to 380 Nm (+40 Nm).
How does Stage 1 differ from stock on the Renault Talisman?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Talisman with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Talisman 1.7 Blue dCi 150 hp?
A remap of the Renault Talisman 1.7 Blue dCi 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Talisman 1.7 Blue dCi 150 hp?
Stage 2 on the Renault Talisman 1.7 Blue dCi 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Renault Talisman 1.7 Blue dCi 150 hp use?
The Renault Talisman 1.7 Blue dCi 150 hp is fitted with the Bosch MD1CS006 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Talisman remain valid after Stage 1?
After remapping the Renault Talisman, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Talisman?
Reading and writing via OBD takes 25-30 minutes on the Renault Talisman. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Talisman?
Before Stage 1 the original of the Renault Talisman 1.7 Blue dCi 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Talisman 1.7 Blue dCi 150 hp cost?
The remap price for the Renault Talisman 1.7 Blue dCi 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.