Renault Talisman 1.3 TCE GPF 160 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Renault Talisman 1.3 TCE GPF 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Talisman 1.3 TCE GPF 160 hp ECU
Renault Talisman (2020) 1.3 TCE GPF 160 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 160 to 165 hp (+5 hp, +3%) and torque from 260 to 300 Nm (+40 Nm). ECU — Siemens/Continental EMS3160. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). Modern Renault Sport models usually require specialised tooling. Renault Sport RS uses high-output turbo engines for its performance variants. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
What is the Stage 1 effect on the Renault Talisman 1.3 TCE GPF 160 hp?
Stage 1 chip tuning on the Renault Talisman 1.3 TCE GPF 160 hp boosts engine output by 5 hp: from 160 to 165 hp. Torque rises from 260 to 300 Nm (+40 Nm).
What changes in the Renault Talisman ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Talisman with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Talisman 1.3 TCE GPF 160 hp?
A remap of the Renault Talisman 1.3 TCE GPF 160 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Talisman 1.3 TCE GPF 160 hp?
Stage 2 for the Renault Talisman 1.3 TCE GPF 160 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Renault Talisman 1.3 TCE GPF 160 hp use?
The Renault Talisman 1.3 TCE GPF 160 hp is fitted with the Siemens/Continental EMS3160 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Talisman remain valid after Stage 1?
After remapping the Renault Talisman, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Talisman?
Reading and writing via OBD takes 25-30 minutes on the Renault Talisman. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Talisman?
Before Stage 1 the original of the Renault Talisman 1.3 TCE GPF 160 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Talisman 1.3 TCE GPF 160 hp cost?
The remap price for the Renault Talisman 1.3 TCE GPF 160 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.