Renault Scenic 1.3 TCE GPF 140 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Renault Scenic 1.3 TCE GPF 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Scenic 1.3 TCE GPF 140 hp ECU
Renault Scenic (2017) 1.3 TCE GPF 140 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 140 to 165 hp (+25 hp, +18%) and torque from 240 to 300 Nm (+60 Nm). The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). TCe is Renault's signature designation for its petrol turbo engines. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain. Renault's petrol range is shared with Nissan and Dacia within the Alliance.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. On older-generation Renault models, Stage 1 is done via OBD without bench. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How much does the power of the Renault Scenic 1.3 TCE GPF 140 hp increase after Stage 1?
After Stage 1 the power of the Renault Scenic 1.3 TCE GPF 140 hp rises from 140 to 165 hp, a gain of 25 hp (+18%). Torque rises from 240 to 300 Nm (+60 Nm).
How does Stage 1 differ from stock on the Renault Scenic?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Scenic with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Scenic 1.3 TCE GPF 140 hp?
A remap of the Renault Scenic 1.3 TCE GPF 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Scenic 1.3 TCE GPF 140 hp?
Stage 2 on the Renault Scenic 1.3 TCE GPF 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Renault Scenic remain valid after Stage 1?
After remapping the Renault Scenic, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Scenic?
Reading and writing via OBD takes 25-30 minutes on the Renault Scenic. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Scenic?
Before Stage 1 the original of the Renault Scenic 1.3 TCE GPF 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Scenic 1.3 TCE GPF 140 hp cost?
The remap price for the Renault Scenic 1.3 TCE GPF 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.