Renault Scenic 1.3 TCE GPF 115 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Renault Scenic 1.3 TCE GPF 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Scenic 1.3 TCE GPF 115 hp ECU
Renault Scenic (2017) 1.3 TCE GPF 115 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 115 to 130 hp (+15 hp, +13%) and torque from 220 to 250 Nm (+30 Nm). A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Scenic 1.3 TCE GPF 115 hp?
Stage 1 chip tuning on the Renault Scenic 1.3 TCE GPF 115 hp boosts engine output by 15 hp: from 115 to 130 hp. Torque rises from 220 to 250 Nm (+30 Nm).
What changes in the Renault Scenic ECU after Stage 1?
Stage 1 on the Renault Scenic 1.3 TCE GPF 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.3 TCE GPF 115 hp?
Stage 1 on the Renault Scenic 1.3 TCE GPF 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Scenic 1.3 TCE GPF 115 hp?
Stage 2 for the Renault Scenic 1.3 TCE GPF 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Renault Scenic?
Stage 1 on the Renault Scenic voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Scenic 1.3 TCE GPF 115 hp done?
The full remap cycle for the Renault Scenic — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Scenic?
The original Renault Scenic ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Scenic 1.3 TCE GPF 115 hp?
The cost of Stage 1 for the Renault Scenic 1.3 TCE GPF 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.