Renault Megane 1.5 Blue DCI EU6d 95 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Renault Megane 1.5 Blue DCI EU6d 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.5 Blue DCI EU6d 95 hp ECU
Renault Megane (2020) 1.5 Blue DCI EU6d 95 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 95 to 120 hp (+25 hp, +26%) and torque from 240 to 280 Nm (+40 Nm). ECU — Bosch MD1CS006. Flashing method: OBD or Bench depending on the unit's protection. A 2020 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The Renault range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Renault was a pioneer of compact common-rail diesels in Europe.
On modern Renault models, Bench is often needed for the top models. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Renault Megane 1.5 Blue DCI EU6d 95 hp increase after Stage 1?
Stage 1 chip tuning on the Renault Megane 1.5 Blue DCI EU6d 95 hp boosts engine output by 25 hp: from 95 to 120 hp. Torque rises from 240 to 280 Nm (+40 Nm).
What changes in the Renault Megane ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Megane with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Megane?
Yes, Stage 1 on the low-output Renault Megane 1.5 Blue DCI EU6d 95 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Renault Megane 1.5 Blue DCI EU6d 95 hp?
Stage 2 for the Renault Megane 1.5 Blue DCI EU6d 95 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Renault Megane 1.5 Blue DCI EU6d 95 hp use?
The Renault Megane 1.5 Blue DCI EU6d 95 hp is fitted with the Bosch MD1CS006 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Renault Megane remain valid after Stage 1?
After remapping the Renault Megane, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Megane?
Reading and writing via OBD takes 25-30 minutes on the Renault Megane. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Megane?
Before Stage 1 the original of the Renault Megane 1.5 Blue DCI EU6d 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Megane 1.5 Blue DCI EU6d 95 hp cost?
The remap price for the Renault Megane 1.5 Blue DCI EU6d 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.