Renault Megane 1.3 TCE GPF 130 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Renault Megane 1.3 TCE GPF 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.3 TCE GPF 130 hp ECU
Renault Megane (2020) 1.3 TCE GPF 130 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 130 to 165 hp (+35 hp, +27%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3160, Siemens/Continental EMS3161. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Renault is a French carmaker, founded in 1899. Renault Sport RS uses high-output turbo engines for its performance variants. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain. TCe is Renault's signature designation for its petrol turbo engines.
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. On modern Renault models, Bench is often needed for the top models. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
What power gain do you get after chip tuning the Renault Megane 1.3 TCE GPF 130 hp?
After Stage 1 the power of the Renault Megane 1.3 TCE GPF 130 hp rises from 130 to 165 hp, a gain of 35 hp (+27%). Torque rises from 240 to 300 Nm (+60 Nm).
How does Stage 1 differ from stock on the Renault Megane?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Megane with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Renault Megane 1.3 TCE GPF 130 hp?
A remap of the Renault Megane 1.3 TCE GPF 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Renault Megane 1.3 TCE GPF 130 hp?
Stage 2 on the Renault Megane 1.3 TCE GPF 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Renault Megane 1.3 TCE GPF 130 hp built with?
The Renault Megane 1.3 TCE GPF 130 hp comes with 2 ECU variants: Siemens/Continental EMS3160, Siemens/Continental EMS3161. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Megane remain valid after Stage 1?
After remapping the Renault Megane, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Megane?
Reading and writing via OBD takes 25-30 minutes on the Renault Megane. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Megane?
Before Stage 1 the original of the Renault Megane 1.3 TCE GPF 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Megane 1.3 TCE GPF 130 hp cost?
The remap price for the Renault Megane 1.3 TCE GPF 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.