Renault Megane 1.6 SCE EU6.2 115 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Renault Megane 1.6 SCE EU6.2 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.6 SCE EU6.2 115 hp ECU
Renault Megane (2016) 1.6 SCE EU6.2 115 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 115 to 125 hp (+10 hp, +9%) and torque from 165 to 179 Nm (+14 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3125, Bosch ME17.9.20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Renault shares platforms and engines with Nissan, Dacia and Mercedes (through technical partnerships). Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines. On Renault turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On Renault petrol engines, Stage 1 delivers a noticeable gain. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
What is the Stage 1 effect on the Renault Megane 1.6 SCE EU6.2 115 hp?
Stage 1 chip tuning on the Renault Megane 1.6 SCE EU6.2 115 hp boosts engine output by 10 hp: from 115 to 125 hp. Torque rises from 165 to 179 Nm (+14 Nm).
What changes in the Renault Megane ECU after Stage 1?
Stage 1 chip tuning of the Renault Megane is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +10 hp with no hardware changes.
Can you do Stage 1 on the Renault Megane 1.6 SCE EU6.2 115 hp?
Yes, Stage 1 for the Renault Megane 1.6 SCE EU6.2 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Renault Megane?
Stage 2 for the Renault Megane 1.6 SCE EU6.2 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Renault Megane 1.6 SCE EU6.2 115 hp?
The Renault Megane 1.6 SCE EU6.2 115 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental EMS3125, Bosch ME17.9.20. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Renault Megane warranty after chip tuning?
The factory warranty of the Renault Megane does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Renault Megane take?
On the Renault Megane 1.6 SCE EU6.2 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Renault Megane?
Yes, the original ECU firmware of the Renault Megane 1.6 SCE EU6.2 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Renault Megane?
Stage 1 for the Renault Megane 1.6 SCE EU6.2 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.