Renault Megane 2.0T 265 hp — Stage 1 file (+45 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Renault Megane 2.0T 265 hp ECU

Renault Megane (2014) 2.0T 265 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 265 to 310 hp (+45 hp, +17%) and torque from 360 to 460 Nm (+100 Nm). In the CHIPOK database: 2 configurations. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.

Renault Sport is the performance division that builds RS models and the Megane Sport. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants. TCe is Renault's signature designation for its petrol turbo engines.

Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. High-output Renault Sport RS models sit in the sports segment, with solid headroom for Stage 1.

Frequently asked questions

What is the Stage 1 effect on the Renault Megane 2.0T 265 hp?

The Stage 1 gain for the Renault Megane 2.0T 265 hp is 45 hp (+17%) over the stock 265 hp, for a total of 310 hp. Torque rises from 360 to 460 Nm (+100 Nm).

What is Stage 1 chip tuning for the Renault Megane?

Stage 1 on the Renault Megane 2.0T 265 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.

What does Stage 1 give on the powerful Renault Megane 2.0T 265 hp?

The high-output Renault Megane 2.0T 265 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Renault Megane 2.0T 265 hp?

Stage 2 on the Renault Megane 2.0T 265 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the Renault Megane?

Stage 1 on the Renault Megane voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Renault Megane 2.0T 265 hp done?

The full remap cycle for the Renault Megane — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Renault Megane?

The original Renault Megane ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Renault Megane 2.0T 265 hp?

The cost of Stage 1 for the Renault Megane 2.0T 265 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno