Renault Megane 2.0 DCI (2009) 150 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Renault Megane 2.0 DCI (2009) 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 2.0 DCI (2009) 150 hp ECU
Renault Megane (2014) 2.0 DCI (2009) 150 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 150 to 190 hp (+40 hp, +27%) and torque from 380 to 430 Nm (+50 Nm). The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. On older-generation Renault models, Stage 1 is done via OBD without bench. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
How many horsepower does the Renault Megane 2.0 DCI (2009) 150 hp reach after a remap?
After Stage 1 the power of the Renault Megane 2.0 DCI (2009) 150 hp rises from 150 to 190 hp, a gain of 40 hp (+27%). Torque rises from 380 to 430 Nm (+50 Nm).
How does Stage 1 differ from stock on the Renault Megane?
Stage 1 on the Renault Megane 2.0 DCI (2009) 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 DCI (2009) 150 hp?
Stage 1 on the Renault Megane 2.0 DCI (2009) 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Megane 2.0 DCI (2009) 150 hp?
Stage 2 on the Renault Megane 2.0 DCI (2009) 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Renault Megane?
Stage 1 on the Renault Megane voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Megane 2.0 DCI (2009) 150 hp done?
The full remap cycle for the Renault Megane — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Megane?
The original Renault Megane ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Megane 2.0 DCI (2009) 150 hp?
The cost of Stage 1 for the Renault Megane 2.0 DCI (2009) 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.