Renault Megane 2.0T (renault) 220 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Renault Megane 2.0T (renault) 220 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 2.0T (renault) 220 hp ECU
Renault Megane (2008) 2.0T (renault) 220 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 220 to 300 hp (+80 hp, +36%) and torque from 300 to 440 Nm (+140 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2008 — the era before widespread firmware encryption, OBD flash without complications.
Renault Sport is the performance division that builds RS models and the Megane Sport. On high-output turbo-petrol Renault Sport engines, Stage 1 delivers a confident gain. Renault's petrol range is shared with Nissan and Dacia within the Alliance. Renault Sport RS uses high-output turbo engines for its performance variants.
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. High-output Renault Sport RS models sit in the sports segment, with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Renault Megane 2.0T (renault) 220 hp?
Stage 1 for the Renault Megane 2.0T (renault) 220 hp adds +80 hp — power increases from 220 to 300 hp (+36%). Torque rises from 300 to 440 Nm (+140 Nm).
What does a Stage 1 remap of the Renault Megane 2.0T (renault) 220 hp include?
Stage 1 on the Renault Megane 2.0T (renault) 220 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +80 hp with no hardware changes.
What does Stage 1 give on the powerful Renault Megane 2.0T (renault) 220 hp?
Stage 1 on the powerful Renault Megane 2.0T (renault) 220 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Renault Megane 2.0T (renault) 220 hp?
Stage 2 for the Renault Megane 2.0T (renault) 220 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Renault Megane?
Stage 1 on the Renault Megane voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Megane 2.0T (renault) 220 hp done?
The full remap cycle for the Renault Megane — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Megane?
The original Renault Megane ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Megane 2.0T (renault) 220 hp?
The cost of Stage 1 for the Renault Megane 2.0T (renault) 220 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.